ArangoDB Starter Options

The ArangoDB Starter provides a lot of options to control various aspects of the cluster or database you want to run.

Below you’ll find a list of all options and their semantics.

Common options

  • --starter.data-dir=path

path is the directory in which all data is stored. (default “./”)

In the directory, there will be a single file setup.json used for restarts and a directory for each instances that runs on this machine. Different instances of arangodb must use different data directories.

  • --starter.join=address

Join a cluster with master at address address (default “”). Address can be an host address or name, followed with an optional port.

E.g. these are valid arguments.

--starter.join=localhost
--starter.join=localhost:5678
--starter.join=192.168.23.1:8528
--starter.join=192.168.23.1
  • --starter.local

Start a local (test) cluster. Since all servers are running on a single machine this is really not intended for production setups.

  • --starter.mode=cluster|single|activefailover

Select what kind of database configuration you want. This can be a cluster configuration (which is the default), a single server configuration or a activefailover configuration with 2 single services configured to take over when needed.

Note that when running a single server configuration you will lose all high availability features that a cluster provides you.

  • --cluster.agency-size=int

number of Agents in Agency (default 3).

This number has to be positive and odd, and anything beyond 5 probably does not make sense. The default 3 allows for the failure of one Agent.

  • --starter.address=addr

addr is the address under which this server is reachable from the outside.

Use this option only in the case that --cluster.agency-size is set to 1. In a single Agent setup, the sole starter has to start on its own with no reliable way to learn its own address. Using this option the master will know under which address it can be reached from the outside. If you specify localhost here, then all instances must run on the local machine.

  • --starter.host=addr

addr is the address to which this server binds. (default “0.0.0.0”)

Usually there is no need to specify this option. Only when you want to bind the starter to specific network device, would you set this. Note that setting this option to 127.0.0.1 will make this starter unreachable for other starters, which is only allowed for single server deployments or when using --starter.local.

  • --docker.image=image

image is the name of a Docker image to run instead of the normal executable. For each started instance a Docker container is launched. Usually one would use the Docker image arangodb/arangodb.

  • --docker.container=containerName

containerName is the name of a Docker container that is used to run the executable. If you do not provide this argument but run the starter inside a docker container, the starter will auto-detect its container name.

Authentication options

The arango starter by default creates a cluster that uses no authentication.

To create a cluster that uses authentication, create a file containing a random JWT secret (single line) and pass it through the --auth.jwt-secret option.

For example:

arangodb create jwt-secret --secret=jwtSecret
arangodb --auth.jwt-secret=./jwtSecret

All starters used in the cluster must have the same JWT secret.

To use a JWT secret to access the database, use arangodb auth header. See Using authentication tokens for details.

SSL options

The arango starter by default creates a cluster that uses no unencrypted connections (no SSL).

To create a cluster that uses encrypted connections, you can use an existing server key file (.pem format) or let the starter create one for you.

To use an existing server key file use the --ssl.keyfile option like this:

arangodb --ssl.keyfile=myServer.pem

Use arangodb create tls keyfile to create a server key file.

To let the starter created a self-signed server key file, use the --ssl.auto-key option like this:

arangodb --ssl.auto-key

All starters used to make a cluster must be using SSL or not. You cannot have one starter using SSL and another not using SSL.

If you start a starter using SSL, it’s own HTTP server (see API) will also use SSL.

Note that all starters can use different server key files.

Additional SSL options:

  • --ssl.cafile=path

Configure the servers to require a client certificate in their communication to the servers using the CA certificate in a file with given path.

  • --ssl.auto-server-name=name

name of the server that will be used in the self-signed certificate created by the --ssl.auto-key option.

  • --ssl.auto-organization=name

name of the server that will be used in the self-signed certificate created by the --ssl.auto-key option.

Passing through other database options

Options for arangod that are not supported by the starter can still be passed to the DB-Servers using a pass through option. Every option that start with a pass through prefix is passed through to the commandline of one or more server instances.

  • --args.all.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all servers started by this starter.
  • --args.coordinators.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all Coordinators started by this starter.
  • --args.dbservers.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all DB-Servers started by this starter.
  • --args.agents.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all Agents started by this starter.

Some options are essential to the function of the starter. Therefore these options cannot be passed through like this.

Example:

To activate HTTP request logging at debug level for all Coordinators, use a command like this:

arangodb --args.coordinators.log.level=requests=debug

Passing through arangosync options

Options for arangosync that are not supported by the starter can still be passed to the syncmasters & syncworkers using a pass through option. Every option that start with a pass through prefix is passed through to the commandline of one or more arangosync instances.

  • --args.sync.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all arangosync instances started by this starter.
  • --args.syncmasters.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all syncmasters started by this starter.
  • --args.syncworkers.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all syncworkers started by this starter.

Some options are essential to the function of the starter. Therefore these options cannot be passed through like this.

Example:

To set a custom token TTL for direct message queue, use a command like this.

arangodb --args.syncmasters.mq.direct-token-ttl=12h ...

Passing environment variables

Environment variables by default gonna be passed from arangodb process by default. However, variables can be overridden using arangodb command line option.

  • --envs.<group>.<env name>=<value>
  • --envs.all.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=2G sets ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=2G for all instances started by this starter.
  • --envs.coordinators.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=4G sets ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=4G for all Coordinators started by this starter.
  • --envs.dbservers.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=8G sets ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=8G for all DB-Servers started by this starter.

Example:

arangodb --envs.all.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=2G --envs.coordinators.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=4G --envs.dbservers.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=8G ...

Datacenter to datacenter replication options

  • --sync.start-master=bool

Should an ArangoSync master instance be started (only relevant when starter.sync is enabled, defaults to true)

  • --sync.start-worker=bool

Should an ArangoSync worker instance be started (only relevant when starter.sync is enabled, defaults to true)

  • --sync.monitoring.token=<token>

Bearer token used to access ArangoSync monitoring endpoints.

  • --sync.master.jwt-secret=<secret>

Path of file containing JWT secret used to access the Sync Master (from Sync Worker).

  • --sync.mq.type=<message queue type>

Type of message queue used by the Sync Master (defaults to “direct”).

  • --sync.server.keyfile=<path of keyfile>

TLS keyfile of local sync master.

  • --sync.server.client-cafile=<path of CA certificate>

CA Certificate used for client certificate verification.

Miscellaneous options

  • --version

show the version of the starter.

  • --starter.port=int

port for arangodb master (default 8528). See below under “Technical explanation as to what happens” for a description of how the ports of the other servers are derived from this number.

This is the port used for communication of the arangodb instances amongst each other.

  • --starter.disable-ipv6=bool

if disabled, the starter will configure the arangod servers to bind to address 0.0.0.0 (all IPv4 interfaces) instead of binding to [::] (all IPv4 and all IPv6 interfaces).

This is useful when IPv6 has actively been disabled on your machine.

  • --server.arangod=path

path to the arangod executable (default varies from platform to platform, an executable is searched in various places).

This option only has to be specified if the standard search fails.

  • --server.js-dir=path

path to JS library directory (default varies from platform to platform, this is coupled to the search for the executable).

This option only has to be specified if the standard search fails.

  • --server.storage-engine=rocksdb

Sets the storage engine used by the arangod servers. Defaults to rocksdb, which is also the only available option for ArangoDB v3.7 and above.

  • --cluster.start-coordinator=bool

This indicates whether or not a Coordinator instance should be started (default true).

  • --cluster.start-dbserver=bool

This indicates whether or not a DB-Server instance should be started (default true).

  • --server.rr=path

path to rr executable to use if non-empty (default “”). Expert and debugging only.

  • --log.color=bool

If set to true, console log output is colorized. The default is true when a terminal is attached to stdin, false otherwise or when running on Windows.

  • --log.console=bool

If set to true, log output is written to the console (default true).

  • --log.file=bool

If set to true, log output is written to the file (default true). The log file, called arangodb.log, can be found in the directory specified using --log.dir or if that is not set, the directory specified using --starter.data-dir.

  • --log.verbose=bool

show more information (default false).

  • --log.dir=path

set a custom directory to which all log files will be written to. When using the Starter in docker, make sure that this directory is mounted as a volume for the Starter.

Note: When using a custom log directory, all DB-Server files will be named as arangod-<role>-<port>.log. The log for the starter itself is still called arangodb.log.

  • --log.rotate-files-to-keep=int

set the number of old log files to keep when rotating log files of server components (default 5).

  • --log.rotate-interval=duration

set the interval between rotations of log files of server components (default 24h). Use a value of 0 to disable automatic log rotation.

Note: The starter will always perform log rotation when it receives a HUP signal.

  • --starter.unique-port-offsets=bool

If set to true, all port offsets (of slaves) will be made globally unique. By default (value is false), port offsets will be unique per slave address.

  • --docker.user=user

user is an expression to be used for docker run with the --user option. One can give a user id or a user id and a group id, separated by a colon. The purpose of this option is to limit the access rights of the process in the Docker container.

  • --docker.endpoint=endpoint

endpoint is the URL used to reach the docker host. This is needed to run the executable in docker. The default value is “unix:///var/run/docker.sock”.

  • --docker.imagePullPolicy=Always|IfNotPresent|Never

docker.imagePullPolicy determines if the Docker image is being pulled from Docker Hub.

  • If set to Always, the image is always pulled and an error causes the starter to fail.
  • If set to IfNotPresent, the image is not pull if it is always available locally.
  • If set to Never, the image is never pulled (when it is not available locally an error occurs).

The default value is Always is the docker.image has the :latest tag or IfNotPresent otherwise.

  • --docker.net-mode=mode

If docker.net-mode is set, all docker container will be started with the --net=<mode> option.

  • --docker.privileged=bool

If docker.privileged is set, all docker containers will be started with the --privileged option turned on.

  • --docker.tty=bool

If docker.tty is set, all docker containers will be started with a TTY. If the starter itself is running in a docker container without a TTY this option is overwritten to false.

  • --starter.debug-cluster=bool

IF starter.debug-cluster is set, the start will record the status codes it receives upon “server ready” requests to the log. This option is mainly intended for internal testing.

Environment variables

It is possible to replace all commandline arguments for the starter with environment variables. To do so, set an environment variable named ARANGODB_ + <name of command line option in uppercase>, where all dashes, underscores and dots are replaced with underscores.

For example,

ARANGODB_DOCKER_TTY=true arangodb

is equal to:

arangodb --docker.tty=true